Stamping #315 Evaporated Coated Tungsten Boat
1. Stamping #315 Evaporated Coated Tungsten Boat Description:
The primary method of creating the stamping type tungsten boat is hot stamping the tungsten plate to cause plastic deformation.The price of this type of tungsten boat is relatively low, and it has good electrical conductivity, thermal conductivity, high temperature resistance, wear resistance and other excellent characteristics. It is widely used in various vacuum coating industries such as video tube mirrors, electron beam painting, and household appliances.
2. Type of Stamping #315 Evaporated Coated Tungsten Boat:
| Type | Thickness( mm) | Width( mm) | Length( mm) | Manufacturer |
| #207 | 0.2 | 7 | 100 | Shaanxi Peakrise Metal CO.,Ltd |
| #215 | 0.2 | 15 | 100 |
| #308 | 0.3 | 8 | 100 |
| #310 | 0.3 | 10 | 100 |
| #315 | 0.3 | 15 | 100 |
| #413 | 0.4 | 13 | 50 |
| #525 | 0.5 | 25 | 78 |
3. Feature of Stamping #315 Evaporated Coated Tungsten Boat:
Tungsten boat has good electrical conductivity, thermal conductivity and high temperature resistance, wear resistance and corrosion resistance.
4. Craft of Stamping #315 Evaporated Coated Tungsten Boat:
When preparing a stamped tungsten boat:
1.) use a mold to bend the tungsten plate into a part with a certain angle, or bend the bent part again.
2.) deep drawing is to use a die tungsten plate to press into a hollow part of any shape, or to further deform the hollow part.
3.) use a mold to turn the hole or outer edge of the tungsten plate into a straight wall. The die is used to apply an outward radial force to the hollow part to expand the local diameter.
4.) After the expansion, the die is used to apply radial pressure from the outside to the inside on the mouth of the hollow part to reduce the local diameter. The blank is placed in the die cavity and pressed to extrude it from the die cavity to form hollow or solid parts. The end of the sheet is rolled into a nearly closed round head for processing hinge-like parts. A deformation method in which the radial dimension of a hollow or tubular blank is enlarged at a certain position.
5.)Finally, the bent or drawn workpiece is pressed into the correct boat shape.
Please click below button for learn more our products.
Product Tags:
|
|
Stamping #315 Thermal Tungsten Evaporation Boat Tungsten Vacuum Coating Boats Folding Tungsten Boat Images
|
